Repeat step 3 and step 4 to update all faulty drivers. Driver Booster is a professional tool that can help you to download and install updated drivers and missing drivers. You can update your drivers simply by using this application. Download and install Driver Booster. Then you get to know what drivers on your PC are missing, what drivers are outmoded, and what drivers are faulty. For example, if your graphics driver is outdated, you can locate it in Display adapters and then hit the Update button beside it to get it updated for Windows Or you can also Update Now to update all the Windows 10 drivers automatically.
Type cmd in the search box and right click the search result. Choose Run as administrator. Then your computer will check and repair disk problems for you.
After the process is completed, check if your problem is solved. You can manage it by running System File Checker. Here are steps to do that:. After this action is completely finished, your problem should disappear. So, you need to power off your PC and unplug it. Then open your computer case and check if every cable is connected properly.
Make sure you tried this solution. Though it works in few cases, but it can actually solve problems if loose cables are the reason. Hope this passage can give you some help when you encounter such problems. Save my name, email, and website in this browser for the next time I comment. Windows Errors.
Solution 2: Uninstall Recent Updates from Startup Now that your PC runs into error inaccessible boot device on Windows 7, 8, and 10 after Windows 10 update or upgrade, you might as well decide to remove these updates. Force shut down your PC and then power it on again. In Choose an option , select Troubleshoot. In Command Prompt, enter the following command to remove the recent updates on Windows Restart Windows Update Drivers in Device Manager 1.
Right click the Start Menu and choose Device Manager. Expand all options in the list to find out which of them is marked with a yellow exclamation. Right click one of the faulty drivers and choose Update driver. Select Search automatically for updated driver software. I proceeded to reset my PC. Then it went to a blue screen with an error message: Your PC ran into a problem and needs to restart.
Please help, thanks a lot. Microsoft claimed that the error indicates the Microsoft Windows operating system has lost access to the system partition during startup. Boot device failure.
Incompatible disk hardware, like installing a disk controller and add a hard drive, which might be incompatible with your Windows operating system. Recently installed packages may induce the inaccessible boot device error in Windows In this case, you can remove one by one. To do this, you have to go to the Windows Repair mode and using the DSM command since you cannot boot into Windows 10 normally when this error appears.
Steps you need to take:. Restar your computer and then long press the power button for around 5 seconds until it shuts down. Wait for the Windows diagnosis to complete.
Then you computer will reboot into the Command Prompt. Then, execute the following commands in sequence:. After it is done, you can reboot your machine to check whether the error has been resolved.
If not, you can use the same steps to remove another recently updated package or go for the next method. Disk drives aim at allowing the Windows operating system to use your hardware correctly. So, you can update the drivers to verify the problem can be fixed. If you have made some changes on the BIOS settings, it may also trigger the startup issue. Then you can revert the changes and restore the BIOS to the last saved configuration. Restart your computer. Once the startup screen appears, you'll have a very limited window in which you can press the setup key.
After successfully hitting the setup key, the BIOS will load. When it is done, you will be taken to the BIOS setting menu.
